Nokia 6820 - Connecting to a Service

Menu functions
149
Copyright
2004 Nokia. All rights reserved.
service provider. Note that all the bearer-related settings are in the Bearer
settings menu.
Connecting to a service
Firstly, make sure that the service settings of the service that you want to use have
been activated. To activate the settings:
• Press Menu and select Services, Settings and Connection settings. Select
Active service settings and scroll to the set you want to activate and press
Activate.
Secondly, make a connection to the service. There are three ways to connect:
• Open the start page of the service, for example the homepage of the service
provider:
Press Menu and select Services and Home, or in standby mode, press and hold
. If the flip is open, press the corresponding number key.
• Select the bookmark of the service:
Press Menu and select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service settings, activate
another set of service settings and try again.
• Key in the address of the service:
Press Menu and select Services and then Go to address. Key in the address of
the service, and press OK.