Nokia 6820 - Page 84

Copyright2004 Nokia. All rights reserved.
84
• If you have selected POP3 as a server type, then Incoming (POP3) server,
POP3 user name, and POP3 password are shown. If you have selected IMAP4
as a server type, then Incoming (IMAP4) server, IMAP4 user name, and
IMAP4 password are shown. Key in the e-mail server address for incoming
e-mail, then key in the user name and password to access the e-mail
account. If you have not defined an SMTP user name or SMTP password the
e-mail server uses the POP3/IMAP4 user name and password instead.
• Other settings and select:
• Include signature. You can define a signature that is automatically
added to the end of your e-mail, when you write your message.
• Use SMTP authorisation. If your e-mail service provider requires
authentication for sending e-mails, select Yes. In this case, you must
also define your SMTP user name and SMTP password.
• SMTP user name. Key in the user name for outgoing e-mail that you
have obtained from your e-mail service provider.
• SMTP password. Key in the password that you want to use for outgoing
e-mail.
• Outgoing (SMTP) port. Key in the number of the e-mail server port for
outgoing e-mail. The most common default value is 25.
If you have selected POP3 as a server type, the following options are
shown:
• Incoming (POP3) port. Key in the port number that you have obtained
from your e-mail service provider.