NMM-3 Company Confidential
5 - Disassembly Instructions CCS Technical Documentation
Page 5-4 Copyright 2003 Nokia Corporation. Issue 1 (11/2003)
Company Confidential
5. Unscrew Antenna screw. Use a new
Torx Plus screw and a torque of 26
Ncm for assembly.
6. The Corner Piece fits very tight, so
it needs some extra force to separate
it from the B-cover with the SRT-6.
7. The A-cover is fixed with several
plastic clips. Start with the clip near
to the system connector.
8. Loosen the clips anti-clockwise by
using the SRT-6 as a lever. Do not
twist the SRT-6 because this could
cause damage to the cover.
5
6
7
8
To Next Page
Loading...
