ST-66 Rework stencil
ST-66 is a rework stencil used with rework jig RJ-215.
ST-67 Rework stencil
ST-67 is a rework stencil used with rework jig RJ-216.
ST-73 Rework stencil
ST-73 is a rework stencil used with rework jig RJ-236.
SX-4 Smart card
SX-4 is a BB5 security device used to protect critical features in tuning
and testing.
SX-4 is also needed together with FPS-10 when DCT-4 phones are
flashed.
Cables
The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-352; RM-354. For the correct use of the service devices, and the best effort of workbench
setup, please refer to various concepts.
RM-352; RM-354
Service Devices and Service Concepts
Issue 1 COMPANY CONFIDENTIAL Page 2 –13
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
