Telephone
65
1999 Nokia Mobile Phones. All Rights Reserved.
a voice call, but it changes into a fax call when your fax box starts to send you
your faxes.
To make alternating calls, you need to add a special Tel/Fax field to the
contact cards of the recipients of your alternating calls. See ”To make contact
cards” on page 51.
You can also change the mode of the call from voice to fax manually by
pressing Change call mode.
Alternating calls cannot be put on hold or incorporated into a conference call.
Telephone settings
Press Settings in the Telephone main view to open a list of several settings
groups.
To change the settings
1 Select a settings group and press Change to open it.
2 Select a setting and press Change. The current value of the setting is
displayed after the setting name, unless the setting is one the network
services: call diverting, barring or waiting. See the following sections.
Profile settings
The profile settings are used for selecting the operating environment for the
communicator, and for modifying the profile features. One profile is always in use.
Profile in use — Press Change and select the profile you want to use. Press OK.
Profiles — With this setting you can modify the profiles. The available profiles are:
General — The normal profile of the communicator.
Silent — You can set this profile on when you want all the alert tones to
remain silent.
Meeting — You can specify how the communicator operates when you are
in a meeting.
Outdoor — You can specify how the communicator operates when you are
outdoors.
Figure 4
To Next Page
Loading...
