Setting up BlackBerry Connect
10
4 Press Purge deletions to empty the deleted items
folder on a server.
Changing default sending service
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry →
Composing.
3 Select Send using to change the service that is used to
send new BlackBerry e-mails.
When you reply to or forward e-mails , they are sent
using the service to which they were delivered.
4 Press Done to save the changes and exit.
Searching for contacts for
BlackBerry messages
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry →
Composing.
3 Select Check names to set the location of searched
addresses. The following options are available:
• In local contacts only—only the addresses in the
contact databases on your device and memory
card are searched.
• In remote addresses only—only the addresses in
the remote e-mail server address database are
searched.
• In local, then remote—the addresses in the contact
databases on your device and memory card are
searched first. If no match is found, then the
addresses in the remote e-mail server address
database are searched.
4 Press Done to save the changes and exit.
Setting alert tones for BlackBerry
messages
1 Press Messaging, then Menu.
2 Select Tools → Account settings → BlackBerry →
Alerts.
3 Select the profile for which you want to select an
alert tone. Press Tone to select a new tone; Volume
to set the volume; and Play to listen the new tone.
The profiles shown here are the normal device profiles
and change automatically if you add or remove your
own profiles.
4 Press Done to save the changes and exit.
9300i_BlackBerry_Connectivity_EN_2.0.fm Page 10 Tuesday, January 24, 2006 1:50 PM
To Next Page
Loading...
