Nokia BGW320 - Service LED Status and Meanings; Solid White Service LED; Blinking White Service LED (Fast;Slow); Blinking Green Service LED (Fast)

Service LED
Color
Meaning
Solid White
Your Wi-Fi Gateway is online. Connect a device and enjoy!
Blinking White (Fast)
Your Wi-Fi Gateway is starting up, please wait during this time.
Blinking White (Slow)
Your Wi-Fi Gateway is powering up.
Blinking Green (Fast)
Your Wi-Fi Gateway is connected to the network, and ready for activation.
Note: This occurs only during initial installation.
Solid Red
WPS LED is OFF
Your Wi-Fi Gateway is in a location that is causing it to overheat. Move it to a
flat surface (no carpet) where there is sufficient space around, under and
above the device for air to cool your Wi-Fi Gateway
Solid Red
WPS LED is Solid Red
Your Wi-Fi Gateway has a hardware issue. If rebooting doesn't fix it, it needs
replacement.
Blinking Red (Fast)
There is a network service issue which may require AT&T intervention. This
may be a momentary problem; please see if there is a service outage in your
area using Smart Home Manager or myAT&T on a mobile device. Try
rebooting your Wi-Fi Gateway.
Blinking Red (Slow)
Your Wi-Fi Gateway does not have a broadband connection. Please check for
a loose, disconnected, or damaged cable, and then press and hold the Red
reset button for 10 seconds.
Solid Amber
Your Wi-Fi Gateway is powered on. Please wait while it starts up until the light
turns solid white.
Blinking Amber (Slow)
Your Wi-Fi Gateway is receiving an update. Please wait until the light turns
back to solid white.
Blinking Yellow (Fast)
Phone Registration has failed; one of your VoIP lines is having a problem.
LED Symbols
Fast Blink—approximately 2-3
blinks per second
Slow Blink –approximately 1
blink every 2 seconds.
Service LED and WPS button
LED behavior occurs at the
same time.
Service LED
WPS LED