Need help?Do you have a question about the Nokia FastMile 2.1.04 and is the answer not in the manual?
General| Model | FastMile 2.1.04 |
|---|---|
| Power Supply | 12 VDC |
| Ethernet Ports | 4 x Gigabit Ethernet |
| Antenna Type | Internal |
| Wi-Fi Standard | IEEE 802.11a/b/g/n/ac |
| Wi-Fi Frequency Bands | 2.4 GHz & 5 GHz |
| SIM Card Slot | Yes |
| Supported LTE Bands | B1/B3/B7/B8/B20/B28/B38/B40 |
| Technology | LTE |
Details changes made between document issues, including updates to tables and RF exposure information.
Defines the purpose and content covered by the document, including information about safety.
Identifies the intended readers of the document, such as planners and maintenance personnel.
Specifies the prerequisite knowledge for understanding the document, focusing on telecommunications principles.
Explains where to find expansions and descriptions of acronyms and initialisms used in the document.
Provides contact information for technical support and product ordering.
Details Nokia's compliance with TL 9000 requirements and quality practices.
Directs users to relevant safety guideline chapters for essential safety information.
Explains how to access documents from the Nokia Documentation Center.
Provides examples of how special information like Danger, Warning, Caution, and Note is presented.
Explains how options and substeps are identified within procedures using letters and roman numerals.
Describes how to use Adobe Reader to search for a common term across multiple PDF files.
Describes environmental instructions and labels provided with the product, including MCV labels.
Explains the applicability of CRoHS to Electronic Information Products (EIP) in China.
Details environmental labels found on equipment, including those indicating MCV compliance.
Illustrates and describes the label indicating a product is below the Maximum Concentration Value.
Illustrates and describes the label for products exceeding MCV, indicating EFUP value.
Describes compliance with CRoHS for products containing hazardous substances above MCV.
Outlines environmental requirements for handling the gateway, including storage and thermal limits.
References section 2.3.5 for thermal limitations and chapter 15 for specifications.
Specifies storage requirements according to ETS 300-019-1-1, requiring weather-protected locations.
Details transportation requirements according to EN 300-019-1-2, specifying packed, public transport.
Defines stationary use conditions according to EN 300-019-1-3, requiring temperature-controlled locations.
Lists the operating and storage temperature and humidity ranges for the gateway.
Explains compliance with EU RoHS Directive 2011/65/EU regarding hazardous substances.
Details requirements for product collection and treatment at the end of its useful life, per EU directives.
Describes safety instructions for customer documentation and the gateway, including Danger, Warning, Caution, and Note boxes.
Explains the meaning and usage of Danger, Warning, Caution, and Note boxes in safety instructions.
Instructs users to observe safety labels for product compliance and safety information.
Details the gateway's compliance with European safety standards.
Lists the EMC requirements that the Nokia FastMile 4G Gateway complies with.
Specifies the safety standards the gateway complies with, including IEC and UL standards.
States compliance with EN 300 019 European environmental standards.
Confirms that the Nokia FastMile 4G Gateway is not a laser product.
Provides electrical safety guidelines, including information on power supplies, cabling, and protective earth.
Warns against using non-Nokia approved power supplies and their warranty implications.
Provides guidelines for approved cables and the use of supplied cabling with the gateway.
States that earthing and bonding must comply with local electrical codes.
Advises on ESD sensitivity and the need for proper protection when handling the gateway.
Specifies the environmental requirements for operating temperature and humidity.
Describes safety instructions for customer documentation, including Danger, Warning, Caution, and Note boxes.
Explains the meaning and usage of safety instruction boxes like Danger and Warning.
Instructs users to observe safety labels for specific compliance and safety information.
Details the gateway's compliance with North American safety standards.
Lists the EMC, EMI, and ESD requirements the gateway complies with, including FCC parts.
Specifies the equipment safety standards the gateway complies with, such as UL and CSA.
Provides electrical safety guidelines, including power supplies, cabling, and protective earth.
Warns against non-Nokia approved power supplies and potential warranty voiding.
Provides guidelines for approved cables and the use of supplied cabling.
States that earthing and bonding must comply with NEC article 250 or local codes.
Advises on ESD sensitivity and the need for proper protection when handling the gateway.
Specifies environmental requirements including operating temperature and humidity.
Provides a general introduction to the Nokia FastMile 4G Gateway, its functions, and models.
Introduces the gateway's role in providing wireless broadband access and residential gateway functionality.
Describes the web-based user interface for local management and its access requirements.
Explains the gateway's support for remote management and health monitoring via ACS and TR-069.
Details key LTE characteristics for different models, including MIMO, CA, and frequency bands.
Lists the data forwarding methods supported by the gateway, such as tunnel mode.
Describes the two Gigabit Ethernet LAN interfaces and their RJ45 connectors.
Details the POTS interface for traditional telephone service and supported SIP services.
Mentions the supplied power adapter converts AC to 12 VDC and refers to section 11.1 for details.
Provides output power information for different LTE bands for specific gateway models.
Describes E-UTRA band support, frequency, and antenna configuration for different gateway models.
Details the product information labels for the Nokia FastMile 4G Gateway models.
Locates and describes LEDs, LAN ports, POTS port, SIM card slot, and reset button on the gateway.
Specifies the requirement for a 3FF/micro SIM card for LTE network connectivity.
Describes the functions and behavior of the center LED and LTE signal strength LEDs.
Explains that the gateway receives power via a supplied adapter and refers to power consumption details.
Outlines the types of performance information covered in this chapter.
Provides LTE throughput data for different modes (FDD/TDD) and protocols (UDP/TCP).
Details carrier aggregation support for different gateway models and bands.
Provides power consumption figures for maximum power output and idle states.
Explains how to configure the gateway locally via a web-based UI on a PC, laptop, or tablet.
Guides users on establishing a connection and logging into the gateway's web-based UI.
Details how to view device, LAN, WAN, LTE wireless, networking, and voice status information.
Lists network configuration tasks like LAN/WAN, wireless settings, IP routing, and DNS.
Covers security configurations including firewall, MAC filter, IP filter, URL filter, and parental control.
Explains how to configure port forwarding, port triggering, DDNS, NTP service, and voice settings.
Details tasks like changing password, backup/restore, firmware upgrade, and rebooting the gateway.
Guides users on performing troubleshooting and viewing troubleshooting counters for the gateway.
Lists the RF, EMC, RoHS, and Safety standards the Nokia FastMile 4G Gateway complies with.
Provides key specifications for the Nokia FastMile 4G Gateway and its power adapter.
Indicates RF exposure distances for each model based on CE and FCC compliance criteria.
Provides the FCC ID for models and states compliance with Part 15 of FCC Rules.
Confirms compliance with FCC radiation exposure limits for uncontrolled environments.
Provides guidance on the required labeling for the module device in final products.
To Next Page
