14
3 Using the Advanced Car Kit
A compatible mobile phone can be connected to the Advanced Car Kit
CK-7W in one of two ways: over a Bluetooth wireless connection or
using a compatible phone holder with a cable.
• CONNECTING A MOBILE PHONE USING
BLUETOOTH WIRELESS TECHNOLOGY
The first time you establish a wireless link from your Advanced Car Kit
using Bluetooth technology, you will have to pair the handsfree unit
with the compatible mobile phone that you are using. This only needs to
be done once: after this the devices will automatically recognize each
other and establish the link.
Note: If you wish to establish a connection using Bluetooth
wireless technology, make sure that there is no mobile phone
inserted in the phone holder.
Pairing using a Bluetooth passcode
1 Make sure that the mobile phone is switched on and the battery
is charged.
2 Switch on the Advanced Car Kit. For further information, see
"Switching the Advanced Car Kit CK-7W on/off" on page 17.
3 Open the Bluetooth menu in the mobile phone and activate the
Bluetooth function.
4 Make the required settings on the mobile phone to activate a search
for Bluetooth devices within range. For further information on the
settings required on your mobile phone, see the relevant user’s guide.
5 Select Advanced Car Kit from the list of Bluetooth devices found.
6 When prompted, key in the Bluetooth passcode. You will find this
code on the sticker attached to the front of this user’s guide.
The Bluetooth passcode is a four-digit numeric code that corresponds
to the last four digits in the serial number supplied with your
Advanced Car Kit. You will find the serial number on the sticker
attached to the handsfree unit.
CK-7W_ENv1_9230761.book Page 14 Friday, March 26, 2004 11:17 AM
To Next Page
Loading...
