E55 RM-482, RM-483
Service Manual Level 1&2
22 CONFIDENTIAL
11. ASSEMBLY HINTS
11.1 Assembling the LCD
1
2
Note that there are 2 thin corner marking lines
(as shown in the picture) on the PWB for LCD
alignment.
Place the LCD ADHESIVE on the PWB and make
sure that the ADHESIVE is properly glued to the
PWB.
3
4
Protect the LCD with protection foil and attach the
connector of the FRAME ASSY to the PWB before
assembling the LCD.
Attach the LCD connector.
Issue 1 Copyright © 2008 NOKIA. All rights reserved.
To Next Page
Loading...
