Training and Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
28.Apr.2006
14
Service Manual E70 RM-10 / RM-24
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
Page (20)
17. Place the SS-93 between the B-COVER edge and the clip of the
FLIP MODULE and release it carefully.
18. Carefully, turn over the unit securing the FLIP MODULE. Do not
yet separate the parts from each other.
19. Unlock another clip of the FLIP MODULE carefully.
20. Lift the FLIP MODULE a bit and place the ex connector opening
tool as shown.
21. Gently open the ex connector. 22. Remove the EARPIECE.
23. Lift the COAX CABLE connector a bit from its holder with
tweezers.
24. Gently, press out the LCD MODULE from the HINGE ASSEMBLY.
To Next Page
Loading...
