Nokia E75 - Page 15

Nokia E75 RM-412/RM-413
Service Manual Level 1&2
15 Confidential  Copyright © 2009 NOKIA  All rights reserved Version 1.0 ISSUE 1
19) Lift up the Camera Flex with the tweezers. Be
careful not to damage the flex.
20) Use the tweezers to open the Camera connector.
Be careful not to damage the connector. Then remove
the Camera Assembly with the tweezers.
21) Use the pliers to open the AV connector. Be careful
not to damage the connector.
22) Separate the SLIDE MODULE and the engine board
from the B-COVER.
23) Remove the FLEX PLANE from the engine board by
opening a small clip with the dental tool.
24) Open the DYNAMIC FLEX connector with the SRT-6
and separate the engine board and the SLIDE MODULE.
Be careful not to damage the connector.