Mount in a car
11
1. To attach the speakerphone to
the clip, insert the catch on the
clip into the slot at the back of
the speakerphone (1). Rotate the
speakerphone clockwise until it
locks into place (2). (To detach
the speakerphone, rotate it
anticlockwise.)
2. Slide the clip around the
sunvisor from the driver’s
or passenger’s side (3), and
wrap the strap attached to
the clip around the sunvisor
from the back.
3. Thread the strap through
the slot on the clip (4).
Tighten the strap to keep
the speakerphone securely
in place, and firmly press
the hook and loop end of
the strap against the felt on
the strap.
4. Fold the sunvisor up
against the car roof (5).
■ Attach to a
windscreen
You can attach the speakerphone to the windscreen using the supplied
mounting device.
To Next Page
Loading...
Need help?
General
