Product and safety information
Network services and costs
You can only use your RM-917 device on the WCDMA
850, 1700 (AWS), 1900 and GSM/EDGE 850, 900, 1800,
1900 MHz networks. You need a subscription with a
service provider.
You may also need to subscribe to some features.
Make an emergency call
1. Make sure the phone is switched on.
2. Check for adequate signal strength.
You may also need to do the following:
• Put a SIM card in the device, if supported by your
device.
• Switch off the restrictions in your phone, such as
call restriction, fixed dialing, or closed user
group.
•Make sure airplane mode is not switched on.
• If the phone screen and keys are locked, unlock
them.
3. Press
.
4. Select
.
5. Select
.
6. Enter the official emergency number for your
present location. Emergency call numbers vary by
location.
7. Select call.
8. Give the necessary info as accurately as possible.
Do not end the call until given permission to do so.
When you switch your phone on for the first time, you
are asked to create your Microsoft account and set up
your phone. To make an emergency call during the
account and phone setup, tap emergency call .
Important: Activate both cellular and internet calls,
if your phone supports internet calls. The phone may
attempt to make emergency calls both through
cellular networks and through your internet call
service provider. Connections in all conditions cannot
be guaranteed. Never rely solely on any wireless
phone for essential communications like medical
emergencies.
Take care of your device
Handle your device, battery, charger and accessories
with care. The following suggestions help you keep
your device operational.
• Keep the device dry. Precipitation, humidity, and
all types of liquids or moisture can contain
minerals that corrode electronic circuits. If your
device gets wet, remove the battery, and let the
device dry.
• Do not use or store the device in dusty or dirty
areas.
• Do not store the device in high temperatures.
High temperatures may damage the device or
battery.
• Do not store the device in cold temperatures.
When the device warms to its normal
temperature, moisture can form inside the
device and damage it.
• Do not open the device other than as instructed
in the user guide.
• Unauthorized modifications may damage the
device and violate regulations governing radio
devices.
• Do not drop, knock, or shake the device. Rough
handling can break it.
• Only use a soft, clean, dry cloth to clean the
surface of the device.
• Do not paint the device. Paint can prevent proper
operation.
• For optimal performance, switch the device off
and remove the battery from time to time.
• Keep the device away from magnets or magnetic
fields.
• To keep your important data safe, store it in at
least two separate places, such as your device,
memory card, or computer, or write down
important information.
38
To Next Page
Loading...
Need help?
General
