Copyright © 2007 Nokia. All rights reserved.
Connectivity
85
Tip! To check the unique media access control (MAC)
address that identifies your device, enter
*#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a wireless LAN
and manage your wireless LAN connections.
The WLAN wizard shows the status of your wireless LAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status, and
press .
If the search finds wireless LANs, and for example, WLAN
network found is displayed, to automatically create an IAP
and start the web browser using this IAP, select the status,
the option Start Web browsing, and the network.
If you select a secured wireless LAN network, you are asked
to enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name (service
set identifier, SSID). To create a new access point for a
hidden WLAN, select New WLAN.
If you are connected to a wireless LAN, the IAP name is
displayed. To start the web browser using this IAP, select
the status and the option Continue Web browsing. To end
the connection in the wireless LAN, select the status and
the option Disconnect WLAN.
If wireless LAN scanning is off and you are not connected
to any wireless LAN, WLAN scanning off is displayed. To
set scanning on and search for available wireless LANs,
select the status WLAN scanning off.
To start a search for available wireless LANs, select a
status and the option Search for WLAN. To set wireless
LAN scanning off, select a status and the option WLAN
scanning off.
To access the WLAN wizard in the menu, press , and
select Internet > WLAN wiz..
Wireless LAN access points
To search for wireless LANs available within range,
press , and select Internet > WLAN wiz..
Select Options and from the following:
Start Web browsing—to start the Web browsing
Refresh—to refresh the page
Details—to view the details of a network shown in the list.
If you select an active connection, the connection details
are displayed.
Define access point—to create an IAP in a wireless LAN
To Next Page
Loading...
