7
2 Insert a compatible memory card in the slot (8). Make sure
that the contact area on the card is facing up and the
bevelled corner is facing the base of the device.
3 Push the card in (9). You can hear a click when the card
locks into place.
4 Close the door. You cannot use the memory card if the door is open.
Eject the memory card
1 Open the door of the memory card slot.
2 Press the memory card to release it from the slot.
3 Remove the memory card. If the device is switched on, select OK.
Important: Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in the
middle of an operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
To Next Page
Loading...
Need help?
General
