Training & Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
12.Dec.2006
19
Service Manual N71 RM-67/RM-112 Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page
(35)
41. Place the SRT-6 between the C-COVER and the D-COVER as
shown and lift the C-COVER a bit. Do not slide the SRT-6 along the
edge.
42. Now, unlock the C-COVER.
43. Open the FLEX connector carefully. 44. Unscrew the Torx Plus
®
size 5 SCREW.
45. Remove the SHIELD KEY. 46. Remove the KEYMAT MENU.
47. Gently, remove the MENU KEY SURROUNDING ASSY.
Please note: This part must not be reused.
48. Feed the FLEX through the slide in the C-COVER.
To Next Page
Loading...
