Training & Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
12.Dec.2006
24
Service Manual N71 RM-67/RM-112 Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page
(35)
17. Fix the KEYMAT into the C-COVER SLIDE SURROUND. 18. Insert the KEYMAT assembly as shown.
19. Secure the KEYMAT assembly by pressing it into place. 20. Fit the SHIELD KEY.
21. To prevent damaging the plastic thread, turn the SCREW
slightly left first. Then tighten it with a torque setting of 17Ncm.
22. Fit the MENU KEYMAT.
23. Gently, close the FLEX connector.
24. Carefully, feed the FLEX through the slot in the C-COVER by
securing the closed connector.
To Next Page
Loading...
