Training & Vendor Development
CMO Operations & Logistics
Multimedia Creation & Support CONFIDENTIAL
12.Dec.2006
25
Service Manual N71 RM-67/RM-112 Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 4.0
MGR
Page
(35)
25. Fit the C-COVER into the D-COVER and check the correct posi-
tion of the FLEX.
26. Be sure that the surface of the C-COVER is clean.
Fit the new MENU KEY SURROUND ASSY.
27. Press the parts together. 28. To prevent damaging the plastic threads, turn the SCREWS
slightly left first. Then tighten them in the shown order with a
torque setting of 17Ncm.
29. Stick on the new SCREW CUPS. 30. Press the SCREW CUPS into its place.
31. Very carefully, assemble the LID CENTER FRAME paying atten-
tion to the FLEX.
32. Push the BUSHING into its place to secure the LID CENTER
FRAME.
To Next Page
Loading...
