Nokia N73 - Smartphone 42 MB - Server Profile Settings

Connections
100
The downloading of software updates may involve the
transfer of large amounts of data. Contact your service
provider for information on charges for data
transmissions.
Ensure that the battery of your device has enough power
or connect the charger before you start the update.
Warning: If you install a software update, you
cannot use the device, even to make emergency calls,
until the installation is completed and the device is
restarted. Be sure to backup data before accepting
the installation of an update.
When the download is complete, select Yes and then
Accept to install the update, or No to install it later by
using Options >Install update. The installation may
take several minutes.
The device updates the software and restarts. To
complete the update, select OK. When asked, select an
internet access point. Your device sends the software
update status to the server.
To view the server profile settings used for software
updates, select Options >Settings.
Server profiles
Press , and select Tools > Device mgr., and press
. You may receive server profiles and different
configuration settings from your service providers, or
company information management department. These
configuration settings may include access point settings
for data connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
To create a new server profile, select Options > New
server profile. To edit a server profile, select Options >
Edit profile.
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.