EasyManua.ls Logo

Nokia N73 - Smartphone 42 MB - Volume and Loudspeaker Control

Nokia N73 - Smartphone 42 MB
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Your Nokia N73
13
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network service).
All calls to the device are diverted to another
number. If you have two phone lines (network service), the
indicator for the first line is and for the second
.
A compatible headset is connected to the device.
The connection to a compatible headset with
Bluetooth connectivity has been lost.
A compatible loopset is connected to the device.
A compatible Text phone is connected to the device.
A data call is active.
A GPRS packet data connection is available.
A GPRS packet data connection is active.
A GPRS packet data connection is on hold
A packet data connection is active in a part of the
network that supports EDGE. indicates the connection
is on hold and that a connection is available. The icons
indicate that EDGE is available in the network, but your
device is not necessarily using EDGE in the data transfer.
A UMTS packet data connection is available.
A UMTS packet data connection is active.
A UMTS packet data connection is on hold.
Bluetooth connectivity is on.
Data is being transmitted using Bluetooth
connectivity.
A USB connection is active.
An infrared connection is active. If the indicator is
blinking, the device is trying to connect to the other device
or the connection has been lost.
Volume and loudspeaker control
To increase or decrease the
volume level when you have
an active call or are listening
to a sound, press the volume key on the side of the device.
The built-in loudspeaker allows you to speak and listen
from a short distance without having to hold the device to
your ear.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudsp..

Table of Contents

Related product manuals