Media applications
52
Receive RealPlayer settings
You may receive RealPlayer settings in a special text
message from the service provider. See ‘Data and
settings’, p. 63. For more information, contact your service
provider.
Change the RealPlayer settings
Select Options > Settings and from the following:
Video—to have RealPlayer automatically repeat video
clips after they finish playing.
Connection—to select whether to use a proxy server,
change the default access point, and set the port range
used when connecting. Contact your service provider for
the correct settings.
Proxy settings
Use proxy—To use a proxy server, select Yes.
Proxy serv. address—Enter the IP address of the proxy
server.
Proxy port number—Enter the port number of the proxy
server.
Glossary: Proxy servers are intermediate servers
between media servers and their users. Some service
providers use them to provide additional security or
speed up access to browser pages that contain sound or
video clips.
Network settings
Default access point—Scroll to the access point you want
to use to connect to the Internet, and press .
Online time—Set the time for RealPlayer to disconnect
from the network when you pause a media clip playing
through a network link. Select User defined, and press .
Enter the time, and select OK.
Lowest UDP port—Enter the lowest port number of the
server’s port range. The minimum value is 1024.
Highest UDP port—Enter the highest port number of the
server’s port range. The maximum value is 65535.
Select Options > Advanced settings to edit the
bandwidth values for different networks.
Movie director
To create muvees, press , and select Gallery > Images
& video > Options > Edit > Create muvee.
muvees are short, edited video clips that can contain video,
images, music, and text. Quick muvee is created
automatically by Movie after you select the style for the
muvee. Movie uses the default music and text associated
To Next Page
Loading...
