©
 2007 Nokia. All rights reserved.
Messaging
73
Incoming mail serv.—Enter the IP address or host name of 
the mail server that receives your e-mail.
Access point in use—Select an internet access point (IAP). 
See “Connection”, p. 96.
Mailbox name—Enter a name for the mailbox.
Mailbox type—Defines the e-mail protocol that your 
remote mailbox service provider recommends. The options 
are POP3 and IMAP4. This setting can be selected only 
once and cannot be changed if you have saved or exited 
from the mailbox settings. If you use the POP3 protocol, 
e-mail messages are not updated automatically when you 
are online. To see the latest e-mail messages, you must 
disconnect and make a new connection to your mailbox.
Security (ports)—Select the security option used to secure 
the connection to the remote mailbox.
Port—Define a port for the connection.
APOP secure login (for POP3 only)—Use with the POP3 
protocol to encrypt the sending of passwords to the 
remote e-mail server while connecting to the mailbox.
To edit the settings for the e-mail you send, select 
Outgoing e-mail and from the following:
My e-mail address—Enter the e-mail address given to you 
by your service provider.
Outgoing mail serv.—Enter the IP address or host name of 
the mail server that sends your e-mail. You may only be 
able to use the outgoing server of your service provider. 
Contact your service provider for more information.
Access point in use—Select an internet access point (IAP). 
See “Connection”, p. 96.
The settings for User name, Password, Security (ports), 
and Port are similar to the ones in Incoming e-mail.
User settings
My name—Enter your own name. Your name replaces your 
e-mail address in the recipient’s device when the 
recipient’s device supports this function.
Send message—Define how e-mail is sent from your 
device. Select Immediately for the device to connect to the 
mailbox when you select Send message. If you select 
During next conn., e-mail is sent when the connection to 
the remote mailbox is available.
Send copy to self—Select whether you want to send a 
copy of the e-mail to your own mailbox.
Include signature—Select whether you want to attach a 
signature to your e-mail messages.
New e-mail alerts—Select whether you want to receive 
the new e-mail indications (a tone and a note) when new 
mail is received.