©
 2007 Nokia. All rights reserved.
Connections
86
Device manager
Software updates
You may view and update the current software version of 
your device, and check the date of a possible previous 
update (network service).
Press  and select Tools > Device mgr..
To check whether software updates are available, select 
Options > Check for updates. Select an internet access 
point when asked.
If an update is available, information about it is displayed. 
Select Accept to accept to download the update or Cancel 
to cancel the download. The download may take several 
minutes. You can use your device during the download.
Downloading software updates may involve the 
transmission of large amounts of data through your service 
provider's network. Contact your service provider for 
information about data transmission charges.
Make sure that the device battery has enough power, or 
connect the charger before starting the update.
Warning: If you install a software update, you 
cannot use the device, even to make emergency 
calls, until the installation is completed and the 
device is restarted. Be sure to backup data before 
accepting the installation of an update.
When the download is complete, select Yes, then Accept 
to install the update or No to install it later by using 
Options > Install update. The installation may take 
several minutes.
The device updates the software and restarts. To complete 
the update, select OK. When asked, select an internet 
access point. Your device sends the software update status 
to the server.
To view the server profile settings used for software 
updates, select Options > Settings.
Server profiles
To connect to a server and receive configuration settings 
for your device, to create new server profiles, or to view 
and manage existing server profiles, press  , and select 
Tools > Device mgr., scroll right.
You may receive server profiles and different configuration 
settings from your service providers or company 
information management department. These configuration 
settings may include access point settings for data