Nokia N78 - Make Calls; Options During a Call; Voice Calls

Make calls
Voice calls
1. In the standby mode, enter the phone number,
including the area code. To remove a number,
press
C .
For international calls, press
* twice for the + character
(which replaces the intern
ational access code), and
enter the country code, area code (omit the leading
zero if necessary), and phone number.
2. To end the call, press the call key.
3. To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if another
application is active.
To make a call from Contacts, press
, and select
Contacts
. Scroll to the desired
name, or enter the first
letters of the name to the search field. Matching contac
ts
are listed. To call, press the call key. If you have saved
several numbers for a contact,
select the desired number
from the list, and press the call key.
Options during a call
To adjust the volume during a call, use the volume key on
the side of your device. You can also use the scroll key. If
you have set the volume to
Mute, select Unmute
first.
To send an image or a video clip in a multimedia message
to the other participant of the call, select
Options
> Send
MMS
(in UMTS networks only). You can edit the message
and change the recipient before sending. Press the call
key to send the file to a
compatible device (network
service).
To put an active voice call on hold while answering
another incoming
call, select
Options
> Hold. To switch
between the active and the held call, select
Options
>
Swap.
To send DTMF tone strings (for example, a password),
select Options
>
Send DTMF. Enter the DTMF string or
search for it in Contacts. To
enter a wait character (w) or
a pause character (p), press
* repeatedly. To send the
tone, select
OK
. You can add DTMF tones to the phone
number or DTMF fields in a contact card.
© 2008 Nokia. All rights reserved.
121