The packet data settings affect all access points using a
packet data connection.
● Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection (for
example, to send and receive e-mail) is quicker. If there
is no packet data coverage, the device periodically tries
to establish a packet data connection. If you select
When needed, the device uses a packet data
connection only if you start an application or action
that needs it.
● Access point — The access point name is needed to
use your device as a packet data modem to a
compatible computer.
● High speed packet access — Enable or disable the
use of HSDPA (network service) in UMTS networks.
Wireless LAN settings
Press , and select Tools > Settings > Connection >
Wireless LAN.
● Show WLAN availability — Select whether
is
displayed in the standby mode when a wireless LAN is
available.
● Scan for networks — If you set Show WLAN
availability to Yes, select how often the device
searches for available wireless LANs and updates the
indicator.
To view advanced settings, select Options > Advanced
settings. Changing wireless LAN advanced settings is not
recommended.
SIP settings
Press , and select Tools > Settings > Connection >
SIP settings.
Session Initiation Protocol (SIP) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service
provider. You can view, delete, or create these setting
profiles in SIP settings.
Configurations
Press , and select Tools > Settings > Connection >
Configurations.
You may receive trusted server settings from your service
provider in a configuration message. You can save view
or delete these settings in configurations.
Access point name control
Press , and select Tools > Settings > Connection >
APN control.
© 2008 Nokia. All rights reserved. 159
To Next Page
Loading...
