L1L2 Service Manual
 
Co nf id e nt ial | Cop yright  © 2011 Nokia | A ll rights reserved 
 
9.  DISASSEMBLY INSTRUCTIONS 
   
2) You must use the Nokia Standard Toolkit version 
2. You will also need the camera removal tool SS-210 
and a Phillips size 00 screwdriver. 
   
3) Protect the DISPLAY ASSEMBLY with protective film. 
4) Open the USB DOOR by pushing it from the shown 
place. 
   
5) Remove the USB DOOR by pulling it to direc tion 
shown. 
6) Open the SIM DOOR by pulling the release notch to 
direction shown. Pull out and remove the SIM DOOR.