the SIM card in your device to connect to the
network.
Send data using Bluetooth
connectivity
You can have several Bluetooth connections active at a
time. For example, if you are connected to a compatible
headset, you can also transfer files to another
compatible device.
1. Open the application where the item you want to
send is stored.
2. Go to an item, and select Options > Send > Via
Bluetooth.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are as
follows:
computer
phone
audio or video device
other device
To interrupt the search, select Cancel.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can
be transmitted, a tone sounds, and you are asked
to enter a passcode. The same passcode must be
entered in both devices.
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some devices
may show only the unique address (device
address). To find the unique address of your
device, in the dialler, enter *#2820#.
Pair devices
Select Menu > Settings and Connectivity >
Bluetooth.
To pair with compatible devices and view your paired
devices, open the Paired devices tab.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other device
to use the same code. Devices that do not have a user
interface have a factory-set passcode. The passcode is
used only once.
1. To pair with a device, select Options > New
paired device. Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device, as
well.
3. Some audio accessories connect automatically to
your device after pairing. Otherwise, to connect to
an accessory, select Options > Connect to audio
device.
36
Connectivity
To Next Page
Loading...
