Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, select
from the following:
● Set as authorised — Connections between your
device and the authorised device can be made
without your knowledge. You will not be asked for
authorisation or acceptance separately. Use this
status only for your own devices, such as your
compatible headset or PC, or devices that belong to
someone you trust. indicates authorised devices
in the paired devices view.
● Set as unauthorised — Connection requests from
this device must be accepted separately every time.
To cancel a pairing with a device, select Options >
Delete.
To cancel all pairings, select Options > Delete all.
Internet
The XHTML browser in this device supports the Unicode
encoding format.
If the web page is unreadable or not supported and
garbage code is found while browsing, you can try to
select Menu > Web and Options > Settings >
Page > Default encoding, and select a
corresponding encoding.
To browse the web, you need to have an internet
access point configured in your device. Using the web
browser requires network support or WLAN available.
For more information on the web browser, see the
extended user guide on the product support pages of
the Nokia website.
Browse the web
Select Menu > Web.
To browse the web, select
Go to web address from
the toolbar, and enter a web address.
By default, the browser is in full screen mode. To exit
full screen mode, select the arrow icon in the bottom
right corner.
Some web pages may contain material, such as
graphics or video clips, that requires a large amount of
memory to view. If your device runs out of memory
while loading such a web page, insert a memory card.
Otherwise, the video clips are not displayed.
To browse web pages with graphics disabled, to save
memory and increase the page loading speed, select
37
Internet