● Use both hands to keep the camera still.
● The quality of a digitally zoomed image is lower
than that of a non-zoomed image.
● The camera goes into battery saving mode if there
are no actions for about a minute. To continue
capturing images, select Continue.
● Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range. Do
not cover the flash while taking a picture.
To capture an image with the main camera, do the
following:
1. To switch from video mode to image mode, if
necessary, select
> .
2. To capture an image, press the capture key. Do not
move the device before the image is saved and the
final image displayed.
Capture images with secondary camera — To
capture an image, select
. Do not move the device
before the image is saved and the final image
displayed.
To zoom in or out when capturing an image, use the
zoom slider.
To leave the camera open in the background and use
other applications, press the menu key. To return to
the camera, press and hold the capture key.
Location information
You can automatically add capture location
information to the file details of the captured material.
For example, in the Photos application, you can then
view the location where an image was captured.
Select Menu > Applications > Camera.
Add location information to all captured
material — Select Options > Settings > Show GPS
info > On. The location information is available only
for images captured with the main camera.
It may take several minutes to obtain the coordinates
of your location. The availability and quality of GPS
signals may be affected by your location, buildings,
natural obstacles, and weather conditions. If you share
a file that includes location information, also the
location information is shared, and your location may
be visible to third parties viewing the file. The device
requires network services to acquire location
information.
Location information indicators:
●
— Location information unavailable. GPS stays
active in the background for several minutes. If a
satellite connection is made and the indicator
changes to
within that time, all the images
captured and video clips recorded during that time
are tagged based on the received GPS positioning
information.
44
Camera
To Next Page
Loading...
