Nokia RH-18 - RX Channel Select Filter

To Next Page

To Previous Page

RH-18/38 Company confidential

CCS Technical Documentation

Page 52 Nokia Corporation. Issue 1 10/03

RX channel select filter

1 Select Maintenance, Tuning, Rx Channel Select Filter Calibration

2 Press Start and you can select to load values from the phone or not

3 Press AutoTune

4 Press Stop and you can select to save values to the phone or not to..

Figure 50: RX channel selection window

Note: This calibration requires no input signal

Other manuals for Nokia RH-18