RH-18/38 Company confidential
CCS Technical Documentation
Page 62 Nokia Corporation. Issue 1 10/03
Call testing
If all tunings are done, and the phone TX and RX is working a call is the ultimate test of
the phone.
Set CMD55, or similar tester, to manual test and switch the phone to normal if it was in
local. Remember to have a test simcard in the phone.
When the phone has made a registration a call can be made, and it is possible to let the
phone answer via Phoenix. In the Autocaller (Maintenance Testing) you can answer by
ticking Answer when button pushed and then posh the button.
To Previous Page
Loading...
