Nokia RH-36 Series - Remove C-Cover and LCD Assembly; Remove Speaker and Shielding; Disconnect System Connector and Microphone

RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
Page 6 Nokia Corporation. Issue 1 10/03
Removee C-Cover from Engine Module. Unlock LCD snaps on both sides of the display.
Remove LCD inclusive Lightguide. Use tweezers when removing the Speaker.
Take Engine Module from D-Cover. Lever out Shielding, beginning from the top side of the
unit.
If System Connector is tight in the D-Cover, SRT-6 should
be used to loosen it.
Carefully push out Microphone from System Connector. Moder-
ate force is required for this action.