RH-18/36/38 Company confidential
Disassembly Instructions CCS Technical Documentation
Page 8 Nokia Corporation. Issue 1 10/03
Domesheet Exchange
Use SRT-6 to loosen one corner of the Domesheet.
Tear off Domesheet in diagonal direction to avoid remains of
glue.
Take a new Domesheet from carrier film. Do not touch
the keydomes from lower side.
Position Domesheet in direction to the upper right cor-
ner, as close as possible to the shielding edge.
Slowly place Engine Module from top side on. Before sinking the Engine Module, make sure that it is
also close to the same side of the shielding.
To Next Page
Loading...
