70
Power saver time-out—to set the time-out period after which the power saver is
activated
Welcome note / logo—to set the welcome note or logo which is displayed briefly
each time you switch on the phone.
Light time-out—to set the time-out for the display light
Standby mode
Active standby—to enable or disable active standby. See “Active standby,” p. 15.
Shortcuts—to assign shortcuts for the right and left selection keys, scrolling in
different directions or pressing the scroll key in the standby mode. The scroll key
shortcuts are not available if Active standby is On.
Active standby apps.—to select the application shortcuts to appear in the active
standby. This setting is available only if Active standby is set to On.
Operator logo—this setting is visible only if you have received and saved an
operator logo. You can select whether the operator logo is shown.
Tones
Change the tones of the clock, calendar and currently active profile. See “Profiles,”
p. 62.
Language
Phone language—to change the language for the display texts in your phone. This
change may also affect the format used for date and time and the separators used,
for example, in calculations. If you select Automatic, the phone selects the
language according to the information on your SIM card. After you have changed
the display text language, the phone restarts.
Writing language—to change the writing language of your phone. Changing the
language affects the characters and special characters available when writing
text and the predictive text dictionary used.
Predictive text—to set predictive text input On or Off for all editors in the phone.
Select a language for entering predictive text from the list.
Themes
Apply themes. See “Themes,” p. 61.
Voice commands
Edit voice command and voice dialing settings. See “Voice commands,” p. 78.
To Next Page
Loading...
Need help?
General
