Nokia X3-02 - Write text

Nokia X3-
02
RM-639
Service Manual Level 1&2
24 Confidential | Copyright © 2011 Nokia | All rights reserved Version 3.0
25) Remove the MOUNTING ASSY adhesive protective
film with the tweezers.
26) Turn the shown part of the ENGINE BOARD over
and gently press it to lock up. Be careful not to
damage any nearby components.
27) Remove the ANTENNA MODULE adhesive
protective film with the tweezers.
28) Place the ANTENNA MODULE to its place. Make
sure that the adhesive surface is pointing towards
the B-COVER. Press the ANTENNA MODULE to activate
the adhesive.
29) Remove the camera lens protective film with the
tweezers.
30) Place the A-COVER in the B-COVER as shown.