Nokia X5-01 - Page 15

Nokia X5-01
RM-627, RM-648
Service Manual Level 1&2
19) Unscrew the two TORX+ size 4 screws in the
order shown. Note that these screws can be reused.
Do not discard them!
20) Release the two clips holding the MAIN KEYMAT
by sliding the SRT-6 to the direction shown.
21) Release the two clips holding the MAIN KEYMAT
by sliding the SRT-6 to the direction shown.
22) Remove the MAIN KEYMAT.
23) Release the clip to open the USB DOOR. 24) Unscrew the two TORX+ size 4 screws in the
order shown. Note that these screws can be reused.
Do not discard them!