Nokia X5-01
RM-627, RM-648
Service Manual Level 1&2
25) Unscrew the two TORX+ size 4 screws in the
order shown. Note that these screws can be reused.
Do not discard them!
26) Lift up the SLIDE MODULE ASSEMBLY and open
the flex connector with the SS-93. Be careful not to
damage the connector!
27) Use the SS-93 to remove the EARPIECE HOLDER
ASSEMBLY. Be careful not to damage any nearby
components!
28) Move the slide and push the MAIN FLEX
ASSEMBLY through the gap of the SLIDER MODULE.
29) Use the SS-93 to release the MAIN FLEX
ASSEMBLY.
30) Carefully peel off the MAIN FLEX ASSEMBLY.
To Next Page
Loading...
