of the previous search results is
displayed. To search for more
Bluetooth devices, select More
devices.
2 Select the device with which you
want to pair, and enter the
passcode. The same passcode must
be entered in the other device as
well.
3 To make the connection between
your device and the other device
automatic, select Yes. To confirm
the connection manually every time
a connection attempt is made,
select No. After pairing, the device
is saved to the paired devices page.
To give a nickname to the paired device,
select Options > Assign short name.
The nickname is displayed in your
device.
To delete a pairing, select the device
whose pairing you want to delete and
Options > Delete. To delete all
pairings, select Options > Delete all. If
you are currently connected to a device
and cancel the pairing with that device,
pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect
automatically to your device, select Set
as authorised. Connections between
your device and the other device can be
made without your knowledge. No
separate acceptance or authorisation is
needed. Use this status only for your
own devices, such as your compatible
headset or computer, or devices that
belong to someone you trust. If you
want to accept connection requests
from the other device separately every
time, select Set as unauthorised.
To use a Bluetooth audio accessory,
such as a Bluetooth handsfree or
headset, you need to pair your device
with the accessory. For the passcode
and further instructions, see the
accessory user guide. To connect to the
audio accessory, switch on the
accessory. Some audio accessories
connect automatically to your device.
Otherwise, open the paired devices tab,
and select the accessory and Options >
Connect to audio device.
88 Connectivity
© 2010 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
