Need help?Do you have a question about the Nokta MAKRO Simplex+ and is the answer not in the manual?
General| Operating Frequency | 12 kHz |
|---|---|
| Weight | 1.3 kg (2.9 lbs) |
| Display | LCD |
| Operating Principle | VLF (Very Low Frequency) |
| Pinpoint | Yes |
| Frequency Shift | Yes |
| Vibration | Yes |
| Keypad Backlight | Yes |
| Iron Volume | Yes |
| Search Coil | 11" DD |
| Warranty | 2 years |
| Battery Life | Up to 12 hours |
| Sensitivity | Adjustable |
| Audio | 3 tones |
| USB Charging | Yes |
| Search Modes | All Metal, Field, Park |
| Waterproof | Up to 3 meters (10 ft) |
| Target ID | 0-99 |
| Audio Output | Speaker |
| Length | 63 cm - 132 cm (25" - 52") |
| Battery | Built-in rechargeable battery |
| Ground Balance | Automatic and manual |
| Wireless Headphone Compatibility | Yes |
Correct methods for swinging the search coil parallel to the ground for accurate results.
Explanation of Target ID numbers, their interpretation, and factors affecting them.
How target size, depth, and ground conditions affect Target ID readings.
Optimized for conductive grounds like wet beach sand and alkali soils.
Describes the threshold tone, non-discrimination, and ground balancing requirements.
How to adjust sensitivity levels for depth and noise reduction.
How the device indicates target depth and factors affecting accuracy.
Detailed steps for performing automatic ground balance for optimal performance.
Detailed steps for manually adjusting the ground balance value.
Using automatic mode to reject unwanted target IDs by swinging over them.
Step-by-step guide to manually select and reject specific target ID ranges.
How to shift frequencies to eliminate electromagnetic interference.
How to use pinpoint mode to find the exact center of a detected target.
Using the device in wet beach sand and underwater conditions.
To Next Page
