Nolan N-Com R Series User Manual

11
Fig. 7
• Place the system in the special housing in the
back of the helmet, pushing it all the way
into the groove (Fig. 7).
Fig. 8
N.B.: For positioning of the wiring and of the
microphone in the N100-5 helmet, follow the
instructions provided in the dedicated box.
• Fix the cable inside the helmet and make
sure the right fixing clip snaps into its
housing (Fig. 8).
Fig. 9
• Position the microphone in the housing on
the right of the helmet, inserting the boom
pole of the microphone in the groove found
in the chin guard coupling frame (Fig. 9).
Caution: make sure that the side of the
microphone support with the writing “n” is
facing inward.
Fig. 10
N.B.: For positioning of the keypad in helmets
N87, N80-8 and N100-5, follow the instructions
provided in the dedicated box.
• Fix the cable inside the helmet.
• Reassemble the gasket and secure it with the
specific screw.

Nolan N-Com R Series Specifications

General

Brand	Nolan
Model	N-Com R Series
Category	Motorcycle Accessories
Language	English