1 DC IN : Use the included PSU power adapter connected to a power
outlet.
2 POWER : Turns the unit on and off.
3 USB : Use an A to B USB 2.0 connector cable to a computer host.
4 MIDI OUT : Midi data output, use a standard MIDI cable to connect to
MIDI In of an external MIDI device. Outputs the currently playing
sequence.
5 MIDI THRU : Forwards data from MIDI IN. Use a standard MIDI cable
to connect another MIDI device in the chain.
6 MIDI IN : MIDI data input, use a standard MIDI cable to connect to
MIDI Out of an external MIDI device.
7 ACCENT OUT : Outputs a 5V gate signal for each accented steps,
use a standard Eurorack cable.
8 CV2 : Outputs one of the configurable sources as an analog CV, use
a standard Eurorack cable.
9 GATE OUT : Outputs the current pattern note trigs as a 5V gate
signal, use a standard ¼” Eurorack cable.
10 CV OUT : Outputs the current pattern pitch as a 1V/Oct signal, use a
standard Eurorack cable.
11 RESET INPUT : CV clock reset input, use a standard Eurorack cable.
12 CLOCK INPUT : CV clock pulse input, use a standard Eurorack
cable.
13 MAIN OUTPUT : Use a ¼” TRS phone plug (Balanced connection)
Mono vocabulary
Project : Top structure of mono data architecture, This holds 64 patterns,
global settings 40 Mod Notes and 4 custom scales.
Pattern : A sequence of steps to be played in a loop
Step : An element holding information to be sent to the synthesis engine to
“play” sound.
Synth parameter : A parameter directly controlling the internal CVs of the
underlying analog synthesis engine, such as Wave, Freq, Cuto … Even
though the envelope is digital, envelope parameters are considered synth
parameters as well.
Modulation parameter : A parameter that modulates a given synth
parameter. Each synth parameters have dedicated modulation parameters.
Patch : All synth and modulation parameters that form a particular sound.
Each pattern holds its own patch.
Note trig : Information held in a step, triggering the synth engine with a
given note.
Parameter oset : Information held in a step, osetting the value of a given
parameter for the duration of that step.
Mono sound architecture