NORAUTO Booster - Cleaning, Maintenance, and Troubleshooting

79 80
EN
5. The charging time will be more than 8 hours, and the USB output will be
automatically turned off.
WORK LIGHT
1. Press and hold the “POWER” button (5) over 3 seconds to turn it on.
2. Lighting (2) working mode:
- Turning ON: 100% brightness
- 1st short press: 50% dim light
- 2nd short press: Slow flash
- 3rd short press: Flash
- 4th short press: SOS
- 5th short press: Close
3. After continuing to work for more than 5 seconds in any working mode,
short press the “POWER” button (5) will turn off the light directly.
TRAVEL LOCK
1. Press and hold the “POWER” button (5) over 8 seconds to turn on the
travel lock mode.
2. In this mode, the device will fall into sleep (lock state): short press the
“POWER” button (5) would not turn on the USB output, work light output
or 12V output.
3. To turn off the “travel lock” mode: Press and hold the “POWER” button (5)
again for over 8 seconds to release the device.
CLEANING AND MAINTENANCE
• WARNING: Always disconnect the device from the power supply before
cleaning or maintenance.
• Never immerse the unit in water or other liquids.
• Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the product.
• Store the appliance in a cool, dry place, protected from moisture and
direct sunlight.
TROUBLESHOOTING
QUESTION ANSWER