NORAUTO START PRO - How to Inflate the Tire; Tire Inflation Procedure

65
HOW TO INFLATE THE TIRE
1
2
Lig ht
Powe r
Lig ht Pow er
READYOVERLOAD
TARGET
2
PSI KG/CM BAR
COOLING
LOWMID DLEFULL
V
%
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
1. Connect the screw-on valve connector to
tire air valve. Twisting it clockwise until it is
securely attached to the tire air valve.
2. Switch the device on.
Light Power
TARGET
BAR
a-1
%
Light Power
TARGET
BAR
TARG ET: 2. 5Bar
a-2
%
TARGET
BAR
TARGET
BAR
start
Light Power
TARGET
BAR
TARGET
BAR
Light Power
a-3 a-4
Stop automatically
%
%
TARGET
BAR
Light Power
TARGET
2
PSI KG/CM BAR
TARGET
BAR
stop
Light Power
b-1 b-2
b-3
start
Light Power
TARGET
BAR
%
%
%
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
Setup
Unit
Inflator
TEST
M
3 3 3
3. You can press “+ ”or “- ” to adjust the suitable value before inflating. The target is set to 2.5 bar
and you can press the inflator button to start. After reaching to 2.5 bar, the inflator will be stopped
automatically. If the target is 0.0 bar, you need to press the inflating button to stop it manually when
it reaches the pressure you would like to have. To remove the air hose from your car tire, twist the
screw-on valve connector counter clockwise.