Blockage of air through these vents can cause:
- shortened life of the refrigerator compressor
- poor cooling performance of the refrigerator
- continuous operation of the refrigerator
- fast battery discharge
- void of the refrigerator warranty
Do not remove the bottom rails from the refrigerator cabinet. The
rails supply space under the refrigerator that is necessary for correct
ventilation.
Installation Options
Install a Decorative Door Panel
The decorative door panel must be 2.0 mm (0.08 inches) or less in
thickness.
1. Remove the door from the refrigerator by remov-
ing the three screws that attach the door hinge to the
bottom of the refrigerator.
2. Remove the panel retainer by removing the four screws
that attach the panel retainer.
3. Gently pull the door panel out of the door.
4. Push a new door panel into the door slot.
Do not over-tighten the screws
and bolts.
5. Put the panel retainer in the original location and at-
tach with four screws.
6. Put the door in the original location and tighten the
three screws.
NOR001203
!
NOR001200NOR001202 NOR001201
12
Door Panel
Screws
Panel Retainer
Bolts
Door Hinge
To Next Page
Loading...
