Norcold N2000 Series Install Manual

15
•
Connect the power connector with the 12V power connector in the vehicle.
For models N2090 and N2152:
It is advised to have the power supply in the vehicle to be routed via the roof. In this
way an over−length of cable is not needed and the power supply cable cannot block
the airways.
For models T2160 and T2175:
Connect the 12V power connector before any furniture is mounted. Make sure that the
12V cable is not trapped between the refrigerator and furniture.
•
Slide the refrigerator to the back of the furniture.
The space holders on the back will stop the fridge at correct position.
•
Use a screw suitable for below hole dimensions.
Table 4: Hole dimensions
N2090 N2152 N2160/N2175
side side floor side floor
A Ø 0.35in
[9mm]
Ø 0.35in
[9mm]
Ø 0.35in
[9mm]
Ø 0.35in
[9mm]
Ø 0.20in
[5mm]
B 0.24in
[6mm]
0.24in
[6mm]
1.34in
[34mm]
0.24in
[6mm]
0.43in
[11mm]
C Ø 0.16in
[4.0mm]
Ø 0.18in
[4.5mm]
Ø 0.18in
[4.5mm]
Ø 0.18in
[4.5mm]
Ø 0.20in
[5mm]
• Fix the refrigerator in place with the screws, using the pre−drilled positions in the cabinet.
A
B

Norcold N2000 Series Specifications

General

Brand	Norcold
Model	N2000 Series
Category	Refrigerator
Language	English