Owner’s Manual 15
Refrigerator Maintenance
While in GAS operation, examine the appearance of the gas ame:
- Open the lower intake vent.
The burner box door can be hot. Wear gloves to avoid
burns.
- Open viewing door.
- Look at the gas ame [75] (See Art 02684).
- The ame should be:
- A darker blue color on the inside of the ame and a lighter blue
color on the outside of the ame.
- A constant shape without ickering.
- Contact your dealer or Norcold authorized service center if the ame is:
- yellow
- ickering or changing shape.
- Make sure the ame does not touch the inside of the ue tube [76].
- If the ame touches the inside of the ue tube, contact your dealer or Norcold authorized service center.
- Close the burner box door.
Remove and clean the burner orice:
Your dealer or Norcold authorized service center must do this procedure.
Remove and clean the burner orice:
- Close the valve at the propane gas tank(s).
- Push the ON / OFF button to shut down the refrigerator.
- Open the lower intake vent to expose the back of the refrigerator.
The burner box cover can be hot. Wear gloves to avoid
burns.
- Disconnect the the Gas Train Assembly (GTA) from the LP supply.
To avoid possible propane gas leaks, always use two
wrenches to loosen and tighten the gas supply line
connections.
- Remove the Gas Train Assembly from the cooling unit by removing the two
screws. (See Art 02672)
Do not try to remove the orice from the orice adapter
when cleaning. Removal will damage the orice and seal
of the orice and can cause a propane gas leak. Leaking
propane gas can ignite or explode which can result in
dangerous personal injury or death. Do not clean the
orice with a pin or other objects.
!
Art 02672
!
!
!
Art 02684
75
76
167
To Next Page
Loading...
Need help?
General
