EasyManua.ls Logo

Nord Drivesystems SK 5207 - Oil Heater (Option: OH); Brake; Covering Cap (Option: H, H66, FAN, MF

Nord Drivesystems SK 5207
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Industrial gear unitsOperating and Assembly Instructions
48 B 1050 en-1819
Pos: 90 /A nl eitu nge n/G etr iebe /3. Mont ag e, L ager ung , V orber eitung , Aufs tellu ng/Öl heizung _(M ontag e) [B10 50] @ 18\ mod_1494400877362_388.docx @ 2349209 @ 2 @ 1
3.19 Oil heater (Option: OH)
WARNING
Injury to persons
Failure to observe the following points may cause serious injury:
Electrical connection of the oil heater must be carried out by a qualified electrician.
NOTICE Gear unit damage
Failure to observe the following points may cause damage to the gear unit:
The oil heater is already installed prior to delivery. Consult the manufacturer's documentation for connecting
the oil heater.
Pos: 91 /Anleitungen/Getriebe/3. Montage, Lagerung, Vorbereitung, Aufstellung/Bremse [B1050] @ 4\mod_1383808494291_388.docx @ 105351 @ 2 @ 1
3.20 Brake
WARNING
Injury to persons
The brake is not adjusted at the factory and proper function is not ensured. This may result in severe material
damage and personal injury.
Adjust the brake as described in the operating instructions before commissioning. The brake is supplied in the
closed condition.
Pos: 92 /Anleitungen/Getriebe/3. Montage, Lagerung, Vorbereitung, Aufstellung/Abdeckhaube_01 [B1050, B2050] @ 28\mod_1551253031324_388.docx @ 2491743 @ 2 @ 1
3.21 Covering cap (Option: H, H66, FAN, MF.., MS…)
Pos: 93 /Anleitungen/Getriebe/3. Montage, Lagerung, Vorbereitung, Aufstellung/Abdeckhaube_03 [B1050, B2050] @ 30\mod_1552979591405_388.docx @ 2511420 @ @ 1
WARNING
Risk of injury
There is a danger of injury due to shrink discs and freely rotating shaft journals.
Use a cover as a guard.
If adequate protection against contact cannot be achieved with a covering cap, the machine and plant
constructor must ensure this by means of additional attachments.
All fastening bolts must be coated with a securing lubricant (e. g. Loctite 242, Loxeal 54-03) and
tightened to the correct torque (7.4 "Torque values").
Pos: 94 /A llg em ein/ Allg em eing ülti ge M od ule/ ---------Seite numbruc h kom pakt --------- @ 13\ mod_1476369695906_0.docx @ 2265495 @ @ 1

Table of Contents

Related product manuals