6
Start developing
After you have set up the development kit and installed the toolchain, it is time to start developing.
There are several ways to continue from here, depending on which networking protocol you want to use.
• For nRF5 SDK for Bluetooth Low Energy, ANT, or proprietary 2.4Ghz (nRF5 Series devices), see nRF5
SDK Getting Started.
• For nRF5 SDK for Mesh (nRF5 Series devices), see Getting Started with Mesh.
• For nRF5 SDK for Thread, see .
• For nRF5 for Zigbee, see .
See also Software development Getting Started Guides for guidance for the main Integrated Development
Environment (IDE)s .
4452_198 v1.0
13
To Next Page
