4 System overview
Doc. ID 4374_139 v1.1
Page 20
Although the specifics of the pairing process may differ between platforms, the main steps remain the same.
1. Scan for the Smart Remote 3.
2. Connect to the Smart Remote 3.
3. Bond/pair with the Smart Remote 3.
Read more about Bluetooth
®
low energy and HID over GATT at developer.bluetooth.org.
4.1.2 Trackpad
The trackpad has five-point multi-touch functionality and advanced gesture recognition, making it a versatile
interface device for the remote control.
The trackpad is a Synaptics
®
ClickPad and is identified as a standard mouse by your computer. It does not
require any special software application to work.
Basic use
To use the trackpad, place one of your fingers on the surface of the pad as shown in Figure 2: One-finger
movement on page 20. As you move your finger along the trackpad surface, you should see the mouse
cursor on your computer screen moving according to the movement of your finger.
Figure 2: One-finger movement
To perform the equivalent to a left-click on your mouse, you can either press down the left side of the trackpad
until you feel a button-like click, or tap the surface of the trackpad anywhere with your finger.
Common gestures
Figure 3: Two-finger horizontal scroll on page 21 and Figure 4: Two-finger vertical scroll on page 21
depict trackpad gestures that can be performed.
To Next Page
Loading...